Steinel L600 ESPCam Mod
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Use the Steinel L600 with an ESPcam
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 351
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
Print instructions
Print all the parts with 0.2mm layer height. The seals have to be printed with TPU, the rest with anything, but I'd recommend ASA for UV resistance. As the models aren't oriented correctly, just use the lay flat option in your slicer or common sense if your slicer doesn't have that option.
Hardware
You'll need a 3 pointy (wood) screws with some length of size M2.5. Then, you'll need a M3x20 machine screw and an M3x6x5 heated insert.
Assembly
Insert the heated insert into the connector pin and install the seals. Connect the cables to the camera board and press it into place. The screw everything together, but make sure that the cables don't get jammed when screwing the Housing in.
Modification
Here's the URL to the Onsape workspace (also licensed under CC BY-SA 4.0)