Steinel L600 ESPCam Mod
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Use the Steinel L600 with an ESPcam
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 12
- Makes
- 0
- Views
- 351
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
Print instructions
Print all the parts with 0.2mm layer height. The seals have to be printed with TPU, the rest with anything, but I'd recommend ASA for UV resistance. As the models aren't oriented correctly, just use the lay flat option in your slicer or common sense if your slicer doesn't have that option.
Hardware
You'll need a 3 pointy (wood) screws with some length of size M2.5. Then, you'll need a M3x20 machine screw and an M3x6x5 heated insert.
Assembly
Insert the heated insert into the connector pin and install the seals. Connect the cables to the camera board and press it into place. The screw everything together, but make sure that the cables don't get jammed when screwing the Housing in.
Modification
Here's the URL to the Onsape workspace (also licensed under CC BY-SA 4.0)