A few hardware mounts for an Ender 7 conversion
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A few hardware mounts for an Ender 7 conversion
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 306
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
I created many different new hardware mounts for my Ender 7 conversion.
Here I just upload them all at once. If anyone has suggestions for improvement, I would to modify the mounts.
I printed all mounts ASA.
Attention: I have completely changed the cooling of the hardware, you can find this here: https://www.printables.com/de/model/869942-120140mm-fan-covers-with-mounting-holes
If one of you prefers internal cooling with a 40mm axial or a blower fan, I can also create a bracket for internal cooling.
For the fuse box I used 5x20mm fuse holders and 24V LEDs with a hole size of 6mm. For the larger hole where the 24 volt cable from the power supply goes into the fuse box, I added a 25mm flexible cable hole cover.
I used this as a cover for the auto shutdown relay, but instead of the brackets, I attached it to the bracket I created with screws: https://www.thingiverse.com/thing:4123632