Prusa Enclosure - Raspberry Pi 4 snapfit case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed a easy to add the RaspberryPi version with a snap fit case for the org. Prusa Enclosure. (any M3 works)
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 609
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Closed this one, can be found here:
https://www.printables.com/de/model/870348-combinable-raspberry-pi-4-snapfit-case-easy-to-add
I designed another RaspberryPi Case that fits in the Prusa Enclosure (or any other M3 driven screw/insert), because I was not happy with what I found. I designed this one to add the RaspberryPi easily without harming it.
In many cases I found, I have to choose violence to bring it in. Here I designed the holding pins upside down, so you can easily add the raspberry without any pressure.
Print instructions
Printed with PETG Prusament
0.20 mm layer height
Support for the SD-Card slot and the side openings on the bottom part are added to the gcode files.
BoM
1 M3 heat-set insert. I used from Ruthex M3x5.7 (any other will to, if not longer than 5.7mm and a diameter of 4mm)
1 M3 8mm screw for the original Prusa Enclosure (you can choose what suits best)