Prusa Enclosure - Raspberry Pi 4 snapfit case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Designed a easy to add the RaspberryPi version with a snap fit case for the org. Prusa Enclosure. (any M3 works)
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 26
- Makes
- 0
- Views
- 609
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Closed this one, can be found here:
https://www.printables.com/de/model/870348-combinable-raspberry-pi-4-snapfit-case-easy-to-add
I designed another RaspberryPi Case that fits in the Prusa Enclosure (or any other M3 driven screw/insert), because I was not happy with what I found. I designed this one to add the RaspberryPi easily without harming it.
In many cases I found, I have to choose violence to bring it in. Here I designed the holding pins upside down, so you can easily add the raspberry without any pressure.
Print instructions
Printed with PETG Prusament
0.20 mm layer height
Support for the SD-Card slot and the side openings on the bottom part are added to the gcode files.
BoM
1 M3 heat-set insert. I used from Ruthex M3x5.7 (any other will to, if not longer than 5.7mm and a diameter of 4mm)
1 M3 8mm screw for the original Prusa Enclosure (you can choose what suits best)