Bike beverage buddy - can and cup holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Keep your beverage safe while riding your bike. Can holder for 0.33l and 0.5l cans with a diameter of 66mm.
- Ocena
- 0 / 5
- Polubienia
- 52
- Pobrania
- 382
- Wydruki
- 0
- Wyświetlenia
- 1718
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Standard Digital File License
Fathers days tours are difficult. You need to ride a bicycle and at the same time have a place to store your beverage, but your hands are busy. Suffer no more, because here is the solution - the bike beverage buddy. Hands on driving but have your beverage ready for any stop.
You can use it for:
- Beverages
- Espresso
- Elderflower-Lemonade
- Raspberry-Lemonade
The Clamp is designed with a diameter of 32mm. For smaller handle bars, you need to add some rubber or other padding.
The following materials are needed:
- 2x Screws M5x40 DIN 933 for mounting with tools or
- 2x Screws M5x50 DIN 933 when you want to use the 3D Printed screw-head to mount it by hand
- 1x Screw M5x16 DIN 933 for 32mm brackets or
- 1x Screw M5x20 DIN 933 for 26mm brackets
- 3x Self-Fastening Nut M5 DIN 985
- 3x M5 Washer
Printing Instructions for PLA:
Holder and Clamps:
- Orientation: lay on the side surfaces to improve stability
- Layer-height: 0.2mm
- Infill: 15%
- Supports: no
Screw-Knobs:
- Layer-height: 0.08mm
- Infill: 100%
- Supports: no
- Brim: outer
You can find the model on Makerworld too: https://makerworld.com/en/models/465062