Bike beverage buddy - can and cup holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Keep your beverage safe while riding your bike. Can holder for 0.33l and 0.5l cans with a diameter of 66mm.
- Rating
- 0 / 5
- Likes
- 52
- Downloads
- 382
- Makes
- 0
- Views
- 1,718
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Vehicles
- License
- Standard Digital File License
Fathers days tours are difficult. You need to ride a bicycle and at the same time have a place to store your beverage, but your hands are busy. Suffer no more, because here is the solution - the bike beverage buddy. Hands on driving but have your beverage ready for any stop.
You can use it for:
- Beverages
- Espresso
- Elderflower-Lemonade
- Raspberry-Lemonade
The Clamp is designed with a diameter of 32mm. For smaller handle bars, you need to add some rubber or other padding.
The following materials are needed:
- 2x Screws M5x40 DIN 933 for mounting with tools or
- 2x Screws M5x50 DIN 933 when you want to use the 3D Printed screw-head to mount it by hand
- 1x Screw M5x16 DIN 933 for 32mm brackets or
- 1x Screw M5x20 DIN 933 for 26mm brackets
- 3x Self-Fastening Nut M5 DIN 985
- 3x M5 Washer
Printing Instructions for PLA:
Holder and Clamps:
- Orientation: lay on the side surfaces to improve stability
- Layer-height: 0.2mm
- Infill: 15%
- Supports: no
Screw-Knobs:
- Layer-height: 0.08mm
- Infill: 100%
- Supports: no
- Brim: outer
You can find the model on Makerworld too: https://makerworld.com/en/models/465062