Gravity Broom Holder with Toolflex Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Gravity Broom Holder for the Tooflex original rail system
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 59
- Wydruki
- 0
- Wyświetlenia
- 429
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
Remix of the original Gravity Broom Holder by LoboCNC to allow for mounting directly on the Toolflex Original rail system. I simply added an extruded section with holes on the backside with a mounting plate fitting in the rail. For added strength and printability, the mounting plate was added as a separate part so that it can be printed in the strongest direction. It can be attached to the holder using 3pcs 3 x 12mm counter sunk wood screws.
I also added a version with these parts combined if you would like to print it as one part without any additional fixation. I did not test this version myself, but the dimensions are equal to the two part version and should therefore work.
Link to the Toolflex system: https://toolflex.com/
Releases
| 2024.05.07 | v1.0 | Initial Release |
Printing notes
Printed using Protopasta HTPLA. Needs supports for the extruded section on the back of the adapter. Strength and fit seems to be good.