Gravity Broom Holder with Toolflex Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Gravity Broom Holder for the Tooflex original rail system
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 59
- Makes
- 0
- Views
- 429
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
Remix of the original Gravity Broom Holder by LoboCNC to allow for mounting directly on the Toolflex Original rail system. I simply added an extruded section with holes on the backside with a mounting plate fitting in the rail. For added strength and printability, the mounting plate was added as a separate part so that it can be printed in the strongest direction. It can be attached to the holder using 3pcs 3 x 12mm counter sunk wood screws.
I also added a version with these parts combined if you would like to print it as one part without any additional fixation. I did not test this version myself, but the dimensions are equal to the two part version and should therefore work.
Link to the Toolflex system: https://toolflex.com/
Releases
| 2024.05.07 | v1.0 | Initial Release |
Printing notes
Printed using Protopasta HTPLA. Needs supports for the extruded section on the back of the adapter. Strength and fit seems to be good.