BOSCH Wiper Blade (Windshield) Aerotwin Cap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The end cap for BOSCH Aerotwin windshield wiper
- Ocena
- 5 / 5
- Polubienia
- 24
- Pobrania
- 247
- Wydruki
- 0
- Wyświetlenia
- 1178
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The cap holding the actual rubber blade of the windshield wiper broke off mid drive so instead of buying a new set of wipers (since the blade is still almost new) I printed a replacement.
I printed it in PLA and later painted it black (since the white color was really annoying while driving 🙂), but ultimately I would recommend printing the model in ASA since it has high UV resistance.
When assembling you need to apply quite some pressure but once it clicks into place it's a very snug fit so there should be no chance of it flying off mid drive.
The model is for the right side, so you will need to mirror it in the slicer if you need one for the other side.