PolyDryer - Tripple Barrel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Someone had to do it.... so i did. Big part, so there are 2 versions of it. A full size and a splitted model to glue
- Ocena
- 5 / 5
- Polubienia
- 72
- Pobrania
- 269
- Wydruki
- 1
- Wyświetlenia
- 3958
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
Someone had to do it.... so i did. Big part, so there are 2 versions of it. A full size and a splitted model to glue.
Print as you wish, but you probably will need support. Best to use tree support.
Thanks to @3DPrintSOS for the Idea, give his model a like! As mentioned by him:
Print this mod in something that can withstand heat – at least ASA/ABS. For example, mine is printed in CA12-CF.
You can support me via a tip clicking on the link:
Tip me on KO-FI by klicking here:
https://ko-fi.com/surfalex2000