Bandsaw table insert D70 - Hammer N2-38
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Improved and flat Bandsaw table insert , fits Hammer N2-38, Hammer N2-35 and more. outer diameter: 70mm, height 5mm
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 139
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Improved and flat bandsaw table insert , fits Hammer N2-38, Hammer N2-35 and more with respecting dimensions.
The insert delivered with the bandsaw was neither flat or had some reasonable small clearance.
Outer diameter: 70mm with some self centering geometry. height 5mm (+0,2mm removable small knobs)
Inner diameter: 60mm, heigth 15mm.
(Partially) remove the small axial contact faces, if necessary, a chisel works well.
This model allows for a maximum tilt angle of 15°.
Print with enough perimeters, top and bottom layers. Print with upperside on bed.
Should fit Hammer N2-38, N2-35, N3800, N4400, and more like Elektra Bekum, Metabo, Record Power…
Changelog:
16.06.2024: updated improved geometry (outer diameter, slot). 45° version removed.