2.5" Blast Gate Wall Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed around the Powertec 70325 yet may fit others with similar dimensions.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 355
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Needed a slim solution to hold my blast gates firmly in place. So here we go, a simple model that has a channel on the top and bottom for a zip tie to further secure the gate once mounted. Four screw holes exist on the mount that you can choose from, two are countersunk to not interfere with the gate sitting.
Test your mounting location first and go from there, some locations will require you to mount the holder first, then the gate, others maybe not. I would recommend feeding the zip tide through first in case it's a little tough to feed.
No supports needed, I used a standard 5mmx1mm zip tie on this job.