Filament Guide - IKEA Lack Enclosure V2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple Filament Guide through top of the IKEA Lack table for 1,75 mm - enough space for high prints! - without screws
- Ocena
- 4,857 / 5
- Polubienia
- 158
- Pobrania
- 663
- Wydruki
- 16
- Wyświetlenia
- 5554
- Oceny
- 14
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
Description
This is an easy to print and easy to assemble filament guide for the Prusa Enclosure V2 - MMU2S with the filament on the top Lack table. It is designed for 1,75 mm Filament.
This model uses the cut-out for the MMU2s in the top IKEA Lack table and with its short construction, it gives the filament a little more room, when your printer is near max. Z.
This model does not need any screws and it can also be used for any panels with a thickness of max. 0.4 mm.
Instruction
- Print all parts - Sometimes it helps to scale the inside part to 102% in X-Y Axis to get a better fit for the screw (Included in the G-Code)
- Measure where the filament enters the extruder and take the middle position. It depends on how the printer is placed in the enclosure.
- Drill a hole through the Lack table (Drill from the top to prevent damages on the top cover)
- Screw the PC4-M10 Push Fitting into the outside part (wrench width - 10) and place it into the hole from the outside.
- Place the inside part and screw it together with the outside piece
Measurement
Outside
- Diameter - 30.00 mm
- Height - 8.40 mm
Inside
- Diameter - 50.00 mm
- Height - 15.00 mm
Print instructions
Recommended Print Settings
- Infill: 15 %
- Layer height: 0,20 mm
- Supports: No
Print Time
- Together: approx. 1:21 (hr:min)
Required hardware
- PC4-M10 - Push Fitting (Amazon-DE - https://amzn.to/4mx4f4C)
- PTFE Tube with outer diameter - 4mm & inner diameter - 2mm (Amazon-DE - https://amzn.to/4mwH4Hu)
Tools
- drilling machine (Amazon DE - https://amzn.to/3SP7lTU)
- 12 mm Drill (Amazon-DE - https://amzn.to/4dAiEsD)
Tested Printer
Tested Filament
Updates
2025.05.25: Update-Links
If you have any questions or improvements/suggestions do not hesitate to contact me!
If you like what you see, consider following me to support my work - more to come -
Affiliate links: As an Amazon Associate I earn from qualifying purchases. By buying through any of the links above I will earn commission at no extra cost to you. Every product in the links, I bought and tested by myself.