Filament Guide - IKEA Lack Enclosure V2
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple Filament Guide through top of the IKEA Lack table for 1,75 mm - enough space for high prints! - without screws
- Rating
- 4.857 / 5
- Likes
- 158
- Downloads
- 663
- Makes
- 16
- Views
- 5,554
- Reviews
- 14
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
Description
This is an easy to print and easy to assemble filament guide for the Prusa Enclosure V2 - MMU2S with the filament on the top Lack table. It is designed for 1,75 mm Filament.
This model uses the cut-out for the MMU2s in the top IKEA Lack table and with its short construction, it gives the filament a little more room, when your printer is near max. Z.
This model does not need any screws and it can also be used for any panels with a thickness of max. 0.4 mm.
Instruction
- Print all parts - Sometimes it helps to scale the inside part to 102% in X-Y Axis to get a better fit for the screw (Included in the G-Code)
- Measure where the filament enters the extruder and take the middle position. It depends on how the printer is placed in the enclosure.
- Drill a hole through the Lack table (Drill from the top to prevent damages on the top cover)
- Screw the PC4-M10 Push Fitting into the outside part (wrench width - 10) and place it into the hole from the outside.
- Place the inside part and screw it together with the outside piece
Measurement
Outside
- Diameter - 30.00 mm
- Height - 8.40 mm
Inside
- Diameter - 50.00 mm
- Height - 15.00 mm
Print instructions
Recommended Print Settings
- Infill: 15 %
- Layer height: 0,20 mm
- Supports: No
Print Time
- Together: approx. 1:21 (hr:min)
Required hardware
- PC4-M10 - Push Fitting (Amazon-DE - https://amzn.to/4mx4f4C)
- PTFE Tube with outer diameter - 4mm & inner diameter - 2mm (Amazon-DE - https://amzn.to/4mwH4Hu)
Tools
- drilling machine (Amazon DE - https://amzn.to/3SP7lTU)
- 12 mm Drill (Amazon-DE - https://amzn.to/4dAiEsD)
Tested Printer
Tested Filament
Updates
2025.05.25: Update-Links
If you have any questions or improvements/suggestions do not hesitate to contact me!
If you like what you see, consider following me to support my work - more to come -
Affiliate links: As an Amazon Associate I earn from qualifying purchases. By buying through any of the links above I will earn commission at no extra cost to you. Every product in the links, I bought and tested by myself.