3 device holder for HSW Enlarged to fit pixel 8 and devices in cases.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
just made it larger to fit devices with cases on it fits my pixel 8 with a case on it supports on honey comb pieces
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 19
- Wydruki
- 1
- Wyświetlenia
- 119
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
3 Device Holder for HoneyComb Storage Wall
Fits walls with the top of the honeycomb being horizontal
supports on the honeycomb pieces I used auto tree in orca slicer and they where fantastic bambu studios auto tree doesn't extend to the top piece it could probably print without supports but your mileage will vary and its so light at 35g with supports.
fits devices up to 80mm wide and 20mm deep aka my pixel 8 fits perfectly and my other devices fit with room to spare.
When installing make sure to press on the spot where the honeycomb pieces are and not the front of the model to avoid breaking it.
walls are 1.2mm thick all around including the bottom. this cut down on infill and solid fill while keeping it strong.
I used:
0.40 nozzle
2 walls
15% gyroid infill
