Bambu Lab X1C/P1S/P1P Nozzle Case (Print in Place)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple print in place case for storing X1C/P1S/P1P nozzles.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 76
- Wydruki
- 0
- Wyświetlenia
- 630
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
Description
A simple print in place case for X1C/P1S/P1P nozzles. The model features a small windows on top to make identifying the nozzle stored inside easy. The hinge is designed for easy articulation from fully open to fully closed. When fully closed the case makes a satisfying click and will not open accidently even if you happen to drop it.
Suggested Print Settings
Nozzle: .4mm recommended, .6mm should work with Arachne enabled
Layer Height: .2mm
Wall: 2-3
Infill: 15 Percent
Filament: PLA, PETG, ABS, ASA
Should print in about 45 minutes with a .4mm nozzle using the standard .4mm nozzle and .2mm layer height
Special Thanks
This model was inspired by Tobi aus LE and their model posted here.