1 / 2
Bambu Lab X1C/P1S/P1P Nozzle Case (Print in Place) — image 1
1 / 2

Bambu Lab X1C/P1S/P1P Nozzle Case (Print in Place)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A simple print in place case for storing X1C/P1S/P1P nozzles.

Rating
0 / 5
Likes
11
Downloads
76
Makes
0
Views
630
Reviews
0

Updated at source:

Model information

Category
Accessories
License
Creative Commons — Attribution — Noncommercial

Description

A simple print in place case for X1C/P1S/P1P nozzles. The model features a small windows on top to make identifying the nozzle stored inside easy. The hinge is designed for easy articulation from fully open to fully closed. When fully closed the case makes a satisfying click and will not open accidently even if you happen to drop it.  


Suggested Print Settings

Nozzle: .4mm recommended, .6mm should work with Arachne enabled
Layer Height: .2mm 
Wall: 2-3
Infill: 15 Percent
Filament: PLA, PETG, ABS, ASA
Should print in about 45 minutes with a .4mm nozzle using the standard .4mm nozzle and .2mm layer height

Special Thanks
This model was inspired by Tobi aus LE and their model posted here. 

Tags