Prusa MK2.5/MK3 Filament Sensor Cover Upgrade
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sometimes the filament gets stuck when unloading - it can be difficult to get the stuck part out as you have to…
- Ocena
- 5 / 5
- Polubienia
- 16
- Pobrania
- 156
- Wydruki
- 3
- Wyświetlenia
- 1605
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- GNU General Public License v2.0
Sometimes the filament gets stuck when unloading - it can be difficult to get the stuck part out as you have to dismount the filament sensor cover.
I made the cover two part, a fixed part and a screw in part, holding the PTFE guide tube.
If the filament gets stuck, just unscrew the top tube holder and resolve.
The Festo version uses PC-4 M6 pass-through coupling - The PTFE tube will replace the short 13mm tube and works with MMU 2.0 giving better filament path.
For assembly reuse the kit parts and follow the photos.
>> If you like it, please leave a rating, a like or maybe a donation :)
Note: NOT FOR MK2.5S, MK3S/+ and MMU2S.
Print instructions
Shown model is printed in Devil Design Black PETG.