Prusa i3 MK2 LCD Ribbon Clips
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
After mounting maxstrauch's 'Top display holder brackets for original Prusa i3 MK2' I needed some clips to keep the…
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 86
- Wydruki
- 0
- Wyświetlenia
- 759
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
After mounting maxstrauch's 'Top display holder brackets for original Prusa i3 MK2' I needed some clips to keep the LCD ribbon cables in place.
So created my own based on the original from Prusa.
If you mount the LCD in the center of the frame you need 2 small and 3 large clips. You could double the small clips if you move it to the right.
I did not adjust my RAMBO cover. I just loosened the screw and put an old ti-wrap in between next to the ribbons. They can move freely, no stress. Works just fine for now.
Original LCD Clips: http://www.prusa3d.com/prusa-i3-printable-parts
Top display brackets: http://www.thingiverse.com/thing:1918473
Print instructions
Category: 3D Printer Parts Print Settings
Printer Brand: Prusa
Rafts: No
Supports: No
Resolution: 0.2
Infill: 20%
Post-Printing
You can mount them either way
you should mount one up, and down, etc. This way the cables won't get out
How I Designed This
Imported original STL's in Sketchup and used their dimensions to design my own