Archetype Nozzle cleaner For Voron Trident
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
nozzle cleaner for Voron Trident + Archetype (Small) users
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 75
- Wydruki
- 0
- Wyświetlenia
- 847
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
This is a nozzle cleaner for Voron Trident + Archetype (Small) users.
I tested it on Blackbird and Breakneck for about a month and found no problems so I am uploading it.
The mount design was referenced from purgebucket and the bucket design was referenced from Voron2.4 bedpan.
Thank you for releasing the CAD file.
It is similar to the previously uploaded nozzle cleaner for stealth burner.
Modified to increase rigidity to prevent shaking.
Buckets are held in place with magnets
The video was filmed with Blackbird, but I previously confirmed that breakneck also works.
No need for z-homing
Print start, printing, print end can be cleaned at any time.🫡
Maybe it can be used in multicolor as well?
Unless it's a cutting method...🤔
BOM
1x Nozzle Brush
2x 6x3 size Magnet (Holder)
2x Steel FHSC Bolt (FHSC Bucket) (Not SUS!!!)
2x 6x3 size Magnet (Magnet Bucket)
Please select one of the two buckets
I recommend FHSC because the magnet bucket is too strong.
The explanation may be strange due to the use of a translator.🥲