IKEA Rallen Wireless Charging iPhone Xs / Xr / X / 8 / Samsung S9 Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed this neat stand in which you can mount the IKEA Rallen wireless charger.
- Ocena
- 4,667 / 5
- Polubienia
- 22
- Pobrania
- 391
- Wydruki
- 1
- Wyświetlenia
- 2573
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed this neat stand in which you can mount the IKEA Rallen wireless charger.
Standard size: https://www.thingiverse.com/thing:3068268
NEW - XL Version: https://www.thingiverse.com/thing:3141797
Flat version: https://www.thingiverse.com/thing:3068295
You can place in your phone vertical or horizon, will charge both ways.
Tested with:
- iPhone 8
- iPhone X
- iPhone 6 and 7 (with aftermarket add-on)
- Samsung S8
Samsung S9
but should work with any phone not wider than 77.7mm (with case)
How to use?- Remove the outer plastic ring of the Rallen. This is not used. Keep the grey rubber ring on.
- Put the power cord trough the hole from the front
- Place the Rallen in the hole, firmly press it in. It is a really tight fit, like perfect!
Demo video: https://youtu.be/jHZdIWfLOAk
Also check out my other flat design: https://www.thingiverse.com/thing:3068295
Fun fact, I designed this a month ago (July 2018) and in the meantime (week later) Logitech released a Wireless Charger which looks somewhat the same although most universal stands have this look ;)
Print instructions
Category: Mobile Phone Print Settings
Rafts: No
Supports: No
Resolution: 0.2
Infill: 20%
Notes:
No supports needed
There is a small part (upper part of the ring) where it tends to 'drool' a bit but you can use a small knife or special tool to smoothen it. Supports would make it worse anyhow.