Decorative shelf for IridiumIO's Magsafe stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fancy it up and deal with phones whose case keeps it from sticking to the magnets.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 114
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Simple shelf to give a phone a place to rest if a case prevents the magsafe from holding strong enough.
Printed out the original by IridiumIO, looked good, but I discovered my printed case kept the phone from staying in place. Thought about going with another design but had already printed it and didn't want to waste it so thought about gluing on a shelf, or maybe using magnets, but looking at it, I realized I could just print something that slid over the top and wedged in place.
Printed a prototype in gold and thought it looked so good against the black that I printed the second piece in gold as well.
If you want to use it, put your phone on and take a measurement to the bottom of the front face. Subtract 25mm, load up the model and scale it in the Z direction to that measurement. Or, what I had originally been planning, do a print in several colors so you get stripes.
I also highly recommend batman's cable cover, which also looks great in a contrasting color!