IKEA Fridans motorized roller blinds
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A motor for a IKEA product
- Ocena
- 0 / 5
- Polubienia
- 33
- Pobrania
- 79
- Wydruki
- 0
- Wyświetlenia
- 1660
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
Imported from my designs on Thingiverse. Original upload was 19.08.2023 (dd.mm.yyyy)
Motorized IKEA Fridans roller blinds.
Video: https://youtu.be/JS0Cj88Ci7o
IMPORTANT: For the new mounts with an offset, the "offset_0" is the orignal length of 35mm from the mounting surface so the roller will be horizontal with the idle mount
I used M3x12 screws to mount the flanged coupler
to the shaft adapter.
The wood screws I used is DynaPlus 4.0x30
For control I went with a normal power button to enable 12V and 2x 3-position switches wired so I can run the motor in 2 directions.
The 3-pos switches is mounted together with M3x12mm countersink screws.
I used similar to this motor, but you can go for higher speed as well. Check the video down below to see the speed of 30 rpm at 12VDC https://www.aliexpress.com/item/1005004615731578.html
And i use a 6mm flanged coupler like this https://www.aliexpress.com/item/1005001690325110.html
Updates
15.01.2026 - Added more mounts for different styles of mounting the motor and with different offsets if someone needs that. Note that I haven't uploaded any offset block for the idle mount of the roller