1 / 5
Tile Spacer 1.9 mm with three dividers for hexagon tiles — zdjęcie 1
1 / 5

Tile Spacer 1.9 mm with three dividers for hexagon tiles

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A spacer for a gap of 1.9mm or 3/32 inches for hexagon tiles

Ocena
0 / 5
Polubienia
6
Pobrania
46
Wydruki
0
Wyświetlenia
312
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Bathroom
Licencja
Creative Commons — Attribution

A small spacer for hexagon tiles that have a 1.9mm gap between them. I got a bunch of tile from Home Depot and this is the sheet spacing for it that works perfectly. 

Print a bunch of these, then superglue pairs of them together. Use the top one as a handle and the bottom one is the spacer.

On an MK4, with .25 layer height and speed settings each one (a pair of them) takes 4 min to print.

If you like the tile here is the link. (Use Arctic White unsanded grout with it.) 

https://www.homedepot.com/p/Merola-Tile-Metro-1-in-Hex-Glossy-White-with-Flower-10-1-4-in-x-11-7-8-in-Porcelain-Mosaic-Tile-8-6-sq-ft-Case-FXLM1HGH/203784085

 

 

Tagi