1 / 5
Tile Spacer 1.9 mm with three dividers for hexagon tiles
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A spacer for a gap of 1.9mm or 3/32 inches for hexagon tiles
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 46
- Makes
- 0
- Views
- 308
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution
A small spacer for hexagon tiles that have a 1.9mm gap between them. I got a bunch of tile from Home Depot and this is the sheet spacing for it that works perfectly.
Print a bunch of these, then superglue pairs of them together. Use the top one as a handle and the bottom one is the spacer.
On an MK4, with .25 layer height and speed settings each one (a pair of them) takes 4 min to print.
If you like the tile here is the link. (Use Arctic White unsanded grout with it.)