1 / 6
M5 Stamp C3 case
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Basic enclosure for M5 Stamp C3 ESP32 MCU
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 64
- Wydruki
- 0
- Wyświetlenia
- 447
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I've designed a very minimal enclosure for the M5 Stamp C3.
The design was created in Fusion 360 and is parametric. If you want to modify the design. You may also want to download the M5 Stamp placeholder, as I've used as a tool for the USB cut-out of the enclosure.
My print settings where:
- Matrtial: Generic PLA
- Nozzle: .4mm
- Layer height: .3mm