Kärcher Makita battery adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter to operate Kärcher devices with the Makita 18V system (LXT devices).
- Ocena
- 5 / 5
- Polubienia
- 70
- Pobrania
- 645
- Wydruki
- 3
- Wyświetlenia
- 5279
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
V2
V2 is optimized to print without supports and has all cut-outs for other devices
V1
I created the model in such a way that the support structures are included and only need to be broken out after printing. The perforated tip also has to be broken off after printing. I prtinted in PETG.
I have also uploaded the files without supports, in case someone wants to print the files differently.
The following parts are required for assembly:
Makita terminal 644808-8 or 644808-8
3x M3x15 mm screws
2x M3 nuts
4x 6.3 mm flat receptacles
Cable - I have used old loudspeaker cable here