1 3/4" to 2" Roll Bar NMO Antenna Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Made this model to attach an NMO antenna to a roll bar of a Honda Pioneer 1000. I designed it to use 3/8" hole NMO mount
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 253
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Public Domain
Made this model to attach an NMO antenna to a roll bar of a Honda Pioneer 1000 which is 1 ¾". I decided to make it fit up to a 2" bar and used a bushing to bring it back down to 1 ¾" for my use. I designed it to use 3/8" hole NMO mounts. It uses 2 ½" wood screws or similar for fasteners. I printed the main body parts, Antenna_Clamp_C and _D, from simple PLA. I used 4 walls w/ 15% infill. I was in a rush to print it so I used .3mm layers. Printed at the hotter end of the PLA's specified temp range to help layer adhesion.
The bushing that brings the model from 2" to 1 ¾" I printed from TPU.