1 3/4" to 2" Roll Bar NMO Antenna Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Made this model to attach an NMO antenna to a roll bar of a Honda Pioneer 1000. I designed it to use 3/8" hole NMO mount
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 42
- Makes
- 0
- Views
- 253
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Public Domain
Made this model to attach an NMO antenna to a roll bar of a Honda Pioneer 1000 which is 1 ¾". I decided to make it fit up to a 2" bar and used a bushing to bring it back down to 1 ¾" for my use. I designed it to use 3/8" hole NMO mounts. It uses 2 ½" wood screws or similar for fasteners. I printed the main body parts, Antenna_Clamp_C and _D, from simple PLA. I used 4 walls w/ 15% infill. I was in a rush to print it so I used .3mm layers. Printed at the hotter end of the PLA's specified temp range to help layer adhesion.
The bushing that brings the model from 2" to 1 ¾" I printed from TPU.