772 models
Ein Trichter, der beim Berühren mit der Gießkanne nicht gleich runter fällt. Ich habe die Zapfen, die der Schlossdeckel besitzt hier her übertragen. Dadurch kann ich den Trichter durch Drehen fest mit dem Stutzen verbinden. Da man leicht…
Print approx. €5.81–€7.11 excl. taxPreliminary estimate for one variant
materiál PLA, PETG tryska 0,4 mm vrstvy 0,3 mm ; 0,15mm pro zvýšení tuhosti použít 4 - 5 perimetrů možno použít na oba konce blatníku , nově přidaná varianta přední “08” , zadní “07” newly added variant front “08”, rear “07”
Print approx. €1.50–€1.83 excl. taxPreliminary estimate for PETGSource material: PET
Für mein Wohnmobil habe ich eine Solar-Rückfahrkamera mit Funk-Übertragung besorgt ("AEG"). Da eine Kabellose Montage möglich ist und ich weder am Kennzeichenhalter noch oben am Wohnmobil die Befestigung für sinnvoll erachte, sollte sie…
Print approx. €0.74–€0.91 excl. taxPreliminary estimate for PETGSource material: PET
##German Version / Deutsche Version:# Nachdem ich meine Satellitenschüssel vom Dach des Wohnmobils entfernt hatte, hatte ich eine offene Kabeldurchführung. Der provisorische Verschluss war keine Augenweide, also: kurz vermessen: 80mm…
Print approx. €1.90–€2.32 excl. taxPreliminary estimate for one variant
Ersatzteile für ein Wohnmobil des Modells Ford Transit, Baujahr 2005. Es handelt sich um Abdeckkappen für die Außenspiegel und die Frontscheibenwischer. Translation: DeepL Spare parts for a Ford Transit motorhome, built in 2005. These are…
Print approx. €0.15–€0.19 excl. taxPreliminary estimate for PETGSource material: PET
When building my Voron I was looking for a nice bed fan solution 🤔 that would fit my Nevermore and help to bring the chamber temperature Even More up🔥 to where it belongs. Since I couldn't find anything that I really liked, I decided to…
Building on the shoulders of giants, we have remixed the renowned inMoov Head design by Gael Langevin to seamlessly integrate with EZ-Robot products, making it the perfect choice for researchers, educators, and robotics enthusiasts alike.…
Fits all Neptune 4 variants. This fan-mod targets to provide better cooling then stock while sticking loosly to the stock design language while integrating 2x 5015 Fans and 1x4015 Fan. There is a PDF with assembly instructions. It also…
Variable Openmod This is a fully open source headphones designed to be easy to assemble, easy to print out without any supports. It is also made to be highly modular, capable of using most 40-52mm drivers. The overall design itself is…
3D MODEL DESCRIPTION My father needed a blade balancer for his lawnmower blade this summer, so I designed him one. How it works: If the blade is unbalanced, one of the edges will weigh further down than the other. Then you have to remove…
a print friendly replacement to your pull start lawnmower. My dog chewed mine up so i had to replace it. I havent printed yet cause i havent printed in ABS or PETG yet. if you print let me know how it works and if anything should be…
The original rubber came loose so we needed a replacement. It fits on the original tyre and can be screwed in place with the existing mounting holes. Printing: We used three walls and 20% infill with a layerheight of 0.3mm. For testing…
The original injection molded handle for the MacAllistar MLMP1600 Lawnmower is far too flimsy and is prone to splitting near its pivot point. (See image of blue handle) It was impossible to find a spare online so I decided to model it…
This is a fully open source headphones designed to be easy to assemble, easy to print out without any supports. It is also made to be highly modular, capable of using most 40-70mm drivers. The overall design itself is also made to be easy…
Reverse engineered chinmounts camera mount for the Scorpion Exo ADX-2 motorcycle helmet. Been using it for 6 months, no problem. Make sure to print in ABS or ASA with 100% infill.
Hier eine platzsparende Lösung um ein Paar Schuhe im Wohnmobil unterzubringen. Ich habe das Teil in ASA gedruckt mit 3 Walls, am besten mit Brim innen und außen drucken, da das Teil zum warpen neigt.
Ersatzteil für abgebrochenen Hebel des Wasserablassventils (Firma Reich) im Wohnwagen oder Wohnmobil. Das Original ist ziemlich schwach dimensioniert. Der Hebel kann mit einem 2,5 mm Splint oder einer 2,5 mm Schraube befestigt werden. Die…
Here is a completed kit for the vyper v3 with the flat ribbon cable to the extruder. "Bed-adapter" to "hotbed-extruderadapter-connection": 23x Chainlink-small 23x Chainlinkcover-small "Extruder-to-hotend" to…
Blumenvase in einem außergewöhnlichen Design. Vom perfekten geometrischen Sechseck bis zum Freiform-Design. Das Modell muss im “Vasen Modus” gedruckt werden! You have to use “Vase Mode”.
kleiner Pflanzentopf für Setzlinge oder kleine Pflanzen. Vasenmodus. You have to use “Vase Mode”.
Der Deckel war vorher mit Stift und Niete befestigt, der Druck ist für eine Einschmelzhülse M3 ausgelegt, und wird mit einer Schraube M3 x 20 befestigt. Ich habe den Deckel mit PETG gedruckt.
Keychain RV, printed in PETG, no Support, 20% Infill
A downside of the Inmotion V11 is that there's very little stable surface to mount power pads on. These fairings are meant to solve that problem. Mounted with M5 x 12mm screws, can also use up to 16mm length. Recommended to use double…
Dieses Modell kann genutzt werden, um es bei Wohnmobilen anzubringen und so einen Halter zu ermöglichen.
Halterung für das Innenmodul der Netatmo Wetterstation. Drucken: PLA Keine Stützen 15% Infill Montage: Halterung an Wand montieren Stecker durch seitliche Öffnung führen Stecker soweit nach hinten ziehen, dass Netatmo von oben in die…
These different styles of catches and the corresponding base to hold all your motorhome, campervan and caravan lockers open! I rounded the edge at the end of the mounting holes to make it more stable. I have also added additional straight…
A wall mount for the charger of an Elops 120E eBike. I have added the STP file so it can be modded to fit chargers of all brands, like Bosch or VanMoof. I would recommend using PETG as PLA tends to sag with constant stress and heat.…
Full customizable Spool drawer organizer for Tinmorry spool. inner diameter 88mm outer diameter 198mm Height = 28mm It can be assembled without any additional parts. Enjoy ! Update Notes： Filename：Tinmorry Filament Spool Drawer - storage…
With this mount a 120 fan can be easily installed on the Open-CNC-Shield by Timo Altholtmann. Spacer bolts are needed to get a proper distance. A detailed assembly instruction and a parts list is also available on my homepage (German):…
This is a connector bracket for Ikea’s Lagkapten and Linnmon desk system. It allows you to connect two of the desks together side by side using the existing pre-drilled holes. The bracket is compatible with both Adils and Olov legs and…
World's most advanced open source headset! A fully open source headset based on the Variable Openmod Part 1. These are parts used to modify the Part 1 into a headset. So you will need parts from Part 1. This is likely to be the last…
Have an Ikea Linnmon table? Have a pair of large headphones? Now you can hang your headphones from your table. Expected table thickness is between 32 to 34 mm, so it should clamp down securely without damaging the table surface. MK 2…
A model to honor the many hours spent upon the seat of a mower… Because who doesn't want a model of a lawnmower sitting on their desk? Like, download, and comment if you want to see more models like this! (And, perhaps, if you are feeling…
Printed with ASA at 0.2mm Quality. Threads will be tight on first installation, several installs and removals will loosen them up.
This is a design by the brilliant Gael Langevin. I've often visited his stand at Maker Faires in Rome and continued to be amazed by his work. I already created this long ago (on an Ultimaker Original, remember the wooden box?), but have…
Da die Teile aus den üblichen Halterungen während der Fahrt herausfallen, habe ich diese Halterung für den Camper entworfen (Januar 2025). Die Halterung ist für Fahrzeuge bzw. den Transport bestens geeignet, weil die Teile darin fest…
Ein kleiner Adapter, um Mignon-Zellen statt Baby-Zellen verwenden zu können. Druck im Vasenmodus, mit 0,8 mm Linienbreite. Print Settings Printer Brand: Anycubic Printer: i3 Mega S/Pro Rafts: No Supports: No Resolution: 0,2 mm Filament:…
I have an IKEA desk made of LINNMON and LAGKAPTEN tops and ADILS legs. It's great, because it was cheap. It's also terrible, because it was cheap. The first problem is that the $5 ADILS legs are not uniformly constructed. Specifically,…
Das 3D Objekt wurde designed und angefertigt, um Wohnmobile wie in meinem Fall ein Carado i447 vor Vandalismus beim AdBlue-Tank zu schützen. Man packt es als Sicherung unter den normal verschließbaren Tankdeckel, damit auch der…
My Bosch lawnmower stalled and melted its drive pulley - I designed and printed a replacement Update 21June 2016 It finally died - the mower ate a chunk of wood which jammed it and caused grievous harm to the pulley and tension bearing…
Printed in PLA, nothing crazy about it
Fuel Cap for Mountfield SP180. Fits perfectly, not sure which other models it fits Print instructions Print top side down Requires supports for the underside, not internally. Use custom supports as auto support will generate supports for…
This is very close to the original ICS 695 concrete chainsaw handle. I printed with 100% infill.
Upload of my project from thingiverse since thingiverse has become trash! Want to try non-planar printing but don't want to remove the fans from your printer or bother setting up Slic3r Non-Planar. Try this! Using 60c bed temp and 200c…
For this Remix you can follow the Assembly instructions of the Original Design. This set will only replace 1:1 the parts from the original with the ones from here. The Center Carrier of this set provides an additional advantage over the…
einfache stl. sie können es auch skalieren
⚠ Please note: So far, I haven't had time to print and test this model myself. If you run into any issues — please leave feedback so I can improve it. 🧾 Disclaimer Before working with any electrical components, make sure you fully…
This is the GPS mount I'm using to mount the UBLOX RTK GPS antenna inside my YardForce Classic 500 mower. In the picture you can see a mount for an external IMU, but this won't work since the UBLOX antenna has a magnet in its base.…
Halterung für verschiedene Klemmen der Baureihe 221
Needed a keychain for my zero turn mower. Enter this simple two color print to get the job done. 4/11/2025 - I've added two new models that increase the height of the mover design.
Lost your a clip for your Husqvarna lawnmotor? This is a quick replacement if so your can put those important covers back onto your machine. Both STL and STEP provided in the download. Tested with 0.4 nozzle and 0.2 layerheight Material:…
This connector is a really nice design. I wanted to use the original IKEA screws, so I shortened it from 10mm to 6mm and inset the screw holes to 3mm. If you're planning to use this without legs, the thicker original is probably better.…
Keder hook for Awning, e.g., on a motorhome Haken für Kederschiene, z.B. Wohnmobil PETG is recommanded
Selbstbau einer Mähroboter Garage (Carport) für weniger als 20€ Materialkosten. Die Garage ist für den WORX Landroid WR165E und ähnliche Modelle zugeschnitten. Eine Anpassung für Roboter Modelle anderer Hersteller ist leicht möglich. Für…
This version is rebuild from the ground up to fit the LS Fanmod. This Piece is not only for people who use custom spool positions its also useful for stock Spool setup because it allows the filemant to bend softly into the extruder.…
A solution to mount unstable panniers to the wall and free up some room. I personally used an extra piece of wood to prevent having to drill 8 holes in the wall but it is not mandatory. I have not tested the mounts under load as I only…
Halterung für zwei Klemmen 221-413
Works better than you would think. Print first layer super slow, maybe add a bit of a glue stick swipe across. DO NOT PRINT WITH BRIM. The brim will interfere with the teeth, it will be impossible to remove the brim. I've included a photo…
I wanted to have a blade balancer which fits a wide range of center hole diameters so that I can balance the blades of all different lawn mowers I have. In my opinion the balancing units one can buy are way too expensive so I came up with…
The Sovol SV06 faces a challenge in which prints with frequent retractions tend to fail due to clogged nozzles. This issue is caused by heat creep, as the heat dissipation is inadequate. To resolve this problem, the following steps are…
This is for carrying on a motorcycle. It's flow rate is rather low of course, but when one needs to transfer a bit of fuel to a friend, then it's going to be invaluable. It takes way less space than a spare fuel container. I drilled and…
For the Game: Twisted Cryptids, by Unstable Games PnP Meeples: Drop Bear (Elegoo Baby Blue - https://a.co/d/gRwb1D1) Kelpie (Elegoo PLA Sea Green - https://a.co/d/9v5i8Ad) Kraken (Sunlu PLA Pink - https://a.co/d/0HzYzns) Also included is…
This is a holder for a 6Ah Ryobi battery for an electric lawnmower. It's designed to charged while hanging on the wall and for it's charger to be hung from the side when not in use. If you need to change the mounting hole size the…
Halterung für zwei Klemmen 221-415
This leg mount is designed to allow you to use 1.5 inch PVC pipe as legs for an IKEA Linnmon tabletop. I have also made matching feet for the PVC pipe that can be found here . Buy me a coffee :) - AureusKhan.com Random text for search…
A holder to fasten to a wall, in wich you can place your VANMOOF's E-bike charger of the type S3 X3. It has the VANMOOF name/logo on it wich can be collored. (used black PLA as base and grey PLA for name/logo.)
Printed vertically, attached using double-sided tape Has cool KYT logo on it. Decided to make one because nobody else has. Please do not print and sell it. Please do not take model and sell it. These models are FREE for a reason.
Modified original, making sides symmetrical. The original has different dimensions on each side. Optimized for Inmotion V10(F) - shorter and narrower. You can freely stretch the width of the model to fit your EUC. You can not stretch the…
Update: This should also fit the S5, I've updated the title accordingly. New rotating Phone Mount for the Van Moof S2/S3/S5 electric bikes. Mounts to the handlebar using 3 cable-ties, magnets embedded in the handlebar-base will help keep…
This is a simple wall mount that I used to put up a plug in lawnmower onto my garage wall. The lawnmower has 6 inch wheels and this is for the 13 inch Ryobi lawnmower. The mount has many opening to make it strong enough to support the…
¡Lleva la acción y la nostalgia de Fortnite del mundo digital al físico con esta exclusiva colección de sprites 3D! Diseñados con un estilo pixel art único en 3D, estos modelos capturan la esencia de tus personajes y objetos favoritos del…
Eine Mini-Gießkanne, die im Vasenmodus gedruckt wird. G-Code für den MINI und “generic PETG” anbei. Druckeinstellungen: vase mode active .1mm layer height .65mm extrusion width for perimeters and outer perimeters standard extrusion width…
I've owned a Qualcast Panther 380 push lawnmower for many years. It's unbreakable, solid, and does an excellent cut. If you own one, you might already know that there are two small pinion gears inside the wheels that need replacing every…
I own a VanMoof M1 (the first model) bike. The bike contained 2 bike light that can be charged by the sun . Since my bike is stored indoors most of the time they were always empty. I've designed these holder to contain 2 cheap lights from…
Für die Sicherung des Schiebefenster von innen an einem Wohnmobil, hier Model chic-c-line von Carthago.
Haken für Matratzenrahmen mit 25 mm Durchmesser. 4 Versionen (geschlossener Haken kürzer und länger, offener Haken kürzer und länger). Druckempfehlung: 25% Infill Filamente ASA, ABS, PETG (kein PLA!) Facebook: 3D Druck für praktische und…
This Adapter adds support for the BIQU MicroProbe v2.0 to Neptune 4 Series Printers and is also compatible with LayerShifted-Fanmod for the N4 Series Printers. May be incompatible with the fanbar! The holes are pre-threaded in the file to…
Use these stands to put your VanMoof upside down without damaging the handlebars. I've included multiple versions: Simple: Print the whole thing in TPU. Overengineered but better looking: print the base in any material you want. The…
This is a replacement wheel for a lawnmower. 8" wheel 1/4" axle
Wenn man die Kartusche im Einhebelmischer austauschen möchte, ist ein normaler Steckschlüssel leider nicht zu gebrauchen. Das Werkzeug aus dem 3D-Druck reicht, um die die Mutter mit der Hand zu lösen und wieder anzuziehen.
zur flachen Montage an der Decke, ersetzt die originale Halterung. es werden weiterhin die Originalen Dichtungen und Schrauben benutzt, außerdem bleibt der Stecker im Original zustand.
zum kleben mit Silikonkleber
The holder for the bed in our motorhome broke and I designed a new one here. Printed with PLA and 25% infill.
Security key for the Lidl Parkside battery powered lawnmower PRMA 40-Li A3. Print flat, no supports needed.
More information can be found on JOGL: https://app.jogl.io/project/1879/RepairsforVanmoofbikes
Realistic bust of a cottonmouth snake. The model was made in zbrush and the render was edited in krita. The model is scaled to be at about 1:1 scale. I recommend printing it on a resin printer or using a low layer height on a filament…
Here in the Netherlands people transport all sorts of stuff on their bikes. Including their beer. Usually this is done by setting the crate on the rear bike rack and holding it with one hand. I designed a way to do it hands free. As the…
To be used with UBBI system and Layer.Shifted's fan mod for reverse bowden systems Features: - Thickened to add more rigidity - Twist locking mechanism with audible snap 🤩 Do you like the design? You can help fund innovations like this!…
Sprühfalschenhalter für die Montage innerhalb des Küchenschranks an der Wand oder Decke. Beide Modelle sind enthalten je nach Bedarf kann die entsprechende Version gedruckt werden. Spray bottle holder for mounting inside the kitchen…
Dekoration für Camping- und Wohnmobilliebhaber. Die Dekoration kann weiterhin individuell gestaltet werden. Die Version 15 hat einige zusätzliche Anwendungen erhalten. Die Farben habe ich mit dem Prusa Slicer hinzugefügt. Gedruckt im…
Ein Schlüssel Anhänger für Wohnmobil in Wohnmobil vorm
Replacement start button for a Kenmore Dryer model: 110.87572601. This has pops into place and is held only with friction. I took a knife and trimmed around the opening since there was a small amount of the outer original plastic covering…
The brand you know now available to print yourself. I suggest printing walls two layers thick at 0.6 or three layers thick at 0.4. printable on MK3 I3 - best if turned to 80 degrees on plate. Strongly suggest using a strong PLA: Prusa…
Most lawnmowers, and a lot of other garden equipment, work best when the blades are sharpened to a 30-degree angle. With this gauge, you no longer have to estimate--just grind or file the blade's edge until tip just reaches the center of…
A useful stand which can be used if you are only using the inmoov hand without the rest of the body.
Grundplatte für 4 Eier, kann auf 6 Eier erweitert werden. Kühlschrank ist ein DometicMDC-090
Required Parts: One M3 8mm screw (four if you're not using the fan mount) Three M3 screws, 10mm or longer (none if you're not using the fan mount) Three 3010 fans (no screws are needed to attach the fans; they'll fit snugly) Important…
Kamerahalterung für Autodarts für folgende Kamera https://www.amazon.de/dp/B0BG1YJWFN?psc=1&ref=ppx_yo2ov_dt_b_product_d inkl. Abdeckung zum klemmen gerduckt mit extrudr PETG schwarz 0.2 mm Schichthöhe, Supports benötigt Bohrungen für M5…
