1 / 4
Hand Crank for M8 Hex Nut (13mm Hex), easy to print, no supports
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a simple hand crank to press on a M8 Hex nut (13mm A/F)
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 67
- Wydruki
- 0
- Wyświetlenia
- 420
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (19)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (5)Powiązane
This is a simple hand crank to press on a M8 Hex Nut with 13mm A/F.
The Handle is fixed with a M4 screw (either a cylinder head- or hex screw works. Just press a M4 hex nut into the handle and screw in the screw (the inside diameter of the handle will hold the screw tight, or use a serurity nut)
Just print both parts in standard orientation, no supports needed.
The crank pictured, is the 80mm crank body with a 50mm handle.
I used the fuzzy skin option on the handle, to give it some texture.