1 / 4
Hand Crank for M8 Hex Nut (13mm Hex), easy to print, no supports
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a simple hand crank to press on a M8 Hex nut (13mm A/F)
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 68
- Makes
- 0
- Views
- 431
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Share Alike
This is a simple hand crank to press on a M8 Hex Nut with 13mm A/F.
The Handle is fixed with a M4 screw (either a cylinder head- or hex screw works. Just press a M4 hex nut into the handle and screw in the screw (the inside diameter of the handle will hold the screw tight, or use a serurity nut)
Just print both parts in standard orientation, no supports needed.
The crank pictured, is the 80mm crank body with a 50mm handle.
I used the fuzzy skin option on the handle, to give it some texture.