Switch holder for consolized Killer Instinct arcade PCB dual board mod
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The switch holder is designed to sit under the PCB in a consolized Killer Instinct arcade PCB with dual board mod
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 987
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The switch holder is designed to sit under the PCB in a consolized Killer Instinct arcade PCB with dual board mod to switch from one game to the other.
The acrylic case in from Emiliano Arlettaz https://github.com/emilianoarlettaz/arcade-pcb-case. The bottom steel stands are 10mm high.
The switch I chose is part #CKN10381-ND from DigiKey.
I printed the item with the switch hole facing down, and supports in the side slots.
A bit stiff to slide between the PCB stands, but worked on the first try.
If you're interested in the dual board mod https://youtu.be/gsnVawQdUa4