Switch holder for consolized Killer Instinct arcade PCB dual board mod
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The switch holder is designed to sit under the PCB in a consolized Killer Instinct arcade PCB with dual board mod
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 23
- Makes
- 0
- Views
- 987
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The switch holder is designed to sit under the PCB in a consolized Killer Instinct arcade PCB with dual board mod to switch from one game to the other.
The acrylic case in from Emiliano Arlettaz https://github.com/emilianoarlettaz/arcade-pcb-case. The bottom steel stands are 10mm high.
The switch I chose is part #CKN10381-ND from DigiKey.
I printed the item with the switch hole facing down, and supports in the side slots.
A bit stiff to slide between the PCB stands, but worked on the first try.
If you're interested in the dual board mod https://youtu.be/gsnVawQdUa4