Pegboard - Measuring Tape Peg
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Reliable, quick, and tight fitting clip+peg to mount a measuring tape to a 1/4" diameter holes, 1" spacing, pegboard.
- Ocena
- 5 / 5
- Polubienia
- 20
- Pobrania
- 142
- Wydruki
- 1
- Wyświetlenia
- 384
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
A simple pegboard mount for a Measuring Tape, with a clip no wider than ¾".
Since this peg has to stay connected to the pegboard when clipping/unclipping the Tape, which is a friction-hold, it's particularly important that the pegs are a tight fit on the board.
Extended on my Standard Peg design, and using measurements for a simple medium-size Measuring Tape - which has a clip on the flat side that is ¾" wide. Simply slot the clip over the lip on the peg to store it, and slide it straight up to take it back off.
I hope you find this useful - and if there are variations needed for different sizes of Measuring Tapes, let me know :)