1 / 6
USB Media Dial — zdjęcie 1
1 / 6

USB Media Dial

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Turn up the volume! Build a custom USB HID media dial with STEMMA QT Rotary encoder and CircuitPython.

Ocena
5 / 5
Polubienia
819
Pobrania
419
Wydruki
5
Wyświetlenia
15 503
Oceny
5

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution — Share Alike

This is a USB HID device that is set up to play media and adjust the volume of your speakers. Underneath the knob is a NeoPixel strip that changes color whenever it’s turned up or down.

You can single-click to play and pause media, double-click to skip to the next track. If you long press, it’ll mute the speaker's volume.

The electronics are housed in our 3D printed snap fit enclosure that features a new design. The knob features a built-in LED diffuser with textured knurling on the outer edge.

We used the filament swap technique to make a multi-material print so there’s no need for a multi-extruder. Just use white PLA filament to diffuse the LEDs.

Code, libraries and assembly instructions are documented in the project Learn Guide links below. 

Learn Guide
https://learn.adafruit.com/usb-rotary-media-dial/ 

QT Py RP2040
https://www.adafruit.com/product/4900 

STEMMA QT Rotary Encoder
https://www.adafruit.com/product/5880 

NeoPixel Side Light Strip 120/m
https://www.adafruit.com/product/3634

STEMMA QT Cable
https://www.adafruit.com/product/4399 


 

Tagi