1 / 7
Metallic gear by phanteks neo g mini v2 bottom cooling
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bottom frame improving case cooling
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 191
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I'm using an AIO water cooling with two 120mm fans on the side of the case for cooling...that's why there's not much airflow in the case...
There is room for two more 120mm fans on the bottom side, but there is no way to mount them... so I made this frame that attaches to the original case leg screws.
Better airflow in the case because it draws air from the bottom of the case directly to the graphics card.
I used 2x slim 120mm Noctua Chromax (NF-A12x15PWM) but there is room for classic 120mm fans.
(( still in the works ))