CWT Carbon Fiber Carriage v1.75 [Final]
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed from the ground up as a versatile product intended to be produced via CNC for specifically Carbon Fiber.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 44
- Wydruki
- 1
- Wyświetlenia
- 377
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
This was designed from the ground up to be CNC manufactured using T700 Carbon Fiber in 4mm. I do not recommend 3D printing this in ANY MATERIAL. I have released this openly as this has been phased out and the versatility is more beneficial for the community than within my personal usage.
Designed to be utilized with my CWT 3D Printed replacement parts.
Compatible with LM10UU, LM8UU, and MGN12H linear rails.
Based on my limited testing, T700 Carbon Fiber is stiff enough for the stock bed sub-40k acceleration using MGN12H linear rails.
The other linear rod options may bend as the stock bed is too heavy. The carriage manufactured in CF reduces the weight that the rods bend, resulting in better and more consistent first layer printing.
1x LDO 2504AC @ 29v/2A tested at 120k - 550mm/s Via LH Stinger's Test Macro
- With 220g CWT CF Bed
- Total Y-Assembly <400g
BSO time 4m16s (Unofficial)
Weights :
CF Y - Carriage T700 = 92.5g
Stock Carriage = 240.3g
If you would like to order one already made, please visit my website.