K1C runout sensor side mount.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Side mount for the bowden tube for better access and flow.
- Ocena
- 5 / 5
- Polubienia
- 47
- Pobrania
- 521
- Wydruki
- 1
- Wyświetlenia
- 3550
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
If you want to mount your filament spool on the side of the K1C, you are still left with the runout sensor and the feeding of the filament at a very bad place, still on the back close to the printer.
So I designed this very simple bracket as a side mount for the runout sensor. So that the end of the Bowden tube is now easily accessible from the front/side of the printer.
The design is made the mount at an angle so that the natural line points to the middle of the spool, so that there will be less drag on the side of the spool, but at simple straight flow, and i also reduced the bends in the Bowden tube. This file should have been included on the USB stick for the printer.
I only have the K1C but I would like to know if it fits on the K1 and K1max.