MCC Olight Magnetic Charger Compact Prong Hanger
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Version 3 of my Olight 21.5mm charger hanger. This one hangs from the prongs of the USB charger itself
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 69
- Wydruki
- 0
- Wyświetlenia
- 454
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
*DO NOT PRINT WITH CONDUCTIVE FILAMENT*
My first two versions of an MCC hanger didn't contain wire management, Third times a charm I guess. This is a minimalistic hanger for Olight magnetic charger bases. It should work with any light that uses the 21.5mm MCC base. I found it easiest to insert the base first and bring the wire through one side. Then fold it back and forth and reinsert the folded cable all at once. Plug your USB charger through the holes and into the wall.
Print with circle horizontal on bed for best fit and accuracy
This is probably the best version however my other versions are located here:
Hanger version:
https://www.printables.com/model/890336-olight-mcc-magnetic-universal-usb-charging-cable-h
Plug version:
https://www.printables.com/model/890519-mcc-magnetic-usb-charging-cable-mini-outlet-dock