Mountain Bike Suspension Blanks
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stand in options for when you have removed your shock from your mountain bike. (Great for parties!)
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 301
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
This model is intended to be a stand in for when your mountain bikes shock is removed. This also creates a fully compressed state on your bike to check clearances between components.
Available options are: 230X65, 230X60, 210X55, and 210X50
NOTE: for all compressed states I have reduced the length by 2mm in account for any frame flex under load.
Lastly, this design includes a 4mm pin to allow the user to orient the link is a straight or 90 deg eyelet configuration. This pin can be ignored and replaced with glue or an M4 fastener if the user has that on hand.