Invisible USB memory & cable kit for MK4
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Conceal the USB stick for a cleaner appearance, ensuring the USB remains easily accessible through a sliding cover.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 326
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Achieve a clean and neat appearance by concealing the MK4 memory stick. I usually keep the USB stick plugged into my MK4, but I disliked the way it was attached to the MK4. Therefore, I opted to hide it completely by installing it beneath the print table. The USB stick is secured to the 3030 extrusions using a twist-lock mechanism. For this setup, I utilized a USB extension cable from Amazon (ASIN: B0CDM7G5WH). The cable holder includes an M3 self-tapping hole, which is optional. I found it to be a tight fit, so I chose not to use it.
A sliding cover conceals the USB stick, yet allows for easy mounting and unmounting by sliding the cover back to expose the memory stick. In pursuit of a uniform appearance, I modified the cable cover as well. The original cover was very close to the Y-axis linear bush housing, posing a risk of collision. By incorporating a groove, I ensured the machine could operate safely without interference. Like the original cover, you need to print the covers in a vase mode, and make sure there is no top & bottom solid layers.