Mx5 catchcan
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Catchcan breather system for MX5 Miata 1.6 and 1.8
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 759
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Share Alike
I created this catchcan because I was unable to find a catchcan i was looking for anywhere. 2 ports in 14mm (no restriction), 1 big port out (no restriction) and 1 drain port at the bottom.
Print and install guide, also see pictures for clarification:
1 print all in ASA, 100% infill
2 Spray all parts with spray paint till the ASA does not soak up any paint anymore, this way its ensure to be water tight. (also inside the catchcan)
3 Optional: Put some steel wool type material in the bottom of the exit compartment for optimal oil to air separation.
4 Attach the lid to the housing using some small screws and some gasket maker at the top of the walls.
5 attach the fittings, (note the smaller fittings are weak, i used steel fittings instead. m16x14 for the 2 bigger ones at the top, and m16x9mm for the drain at the bottom.) I attached the drain hose to a ball style valve to make draining easy.
6 The lid has a recess for a 10mm (socket size) nut which can be used to attach the catchcan to the firewall of the car.