Wyniki wyszukiwania: breather

Darth Malgus Rebreather Mask Remix

Hi Folkard, Hopefully this is more to your satisfaction ; ) Cheers Jace

Lycoming Oil Dipstick Adapter Plug + Breather Tube Adapter/Clip

To connect the engine dehydrator to my Lycoming O-360 in a smooth way, I designed this simple adapter plug. The thread is a standard 1 1/8-12 UNF and the hole is dia 8 mm to provide a snug fit for a 6 mm plastic tube. It's tight enough as…

Harley-Davidson breathers oil catch can

FOREWORD So, there should really be no need for this, but any time I speak with other Harley owners there happens to be someone falling from the tree and knowing nothing about this matter. To be compliant with anti-pollution regulation,…

Chicken waterer using PET botttle + breather

Thankyou to Murdoc for the original design! When using the original print, I ended up drilling a hole in the side at the level I wanted the water to reach (to allow a ‘breather’ hole so water will flow when it is below this point). I…

Mask breather for fiber knit mask

Grade respira melhor para mascara fiber knit Grid breathe better for fiber knit mask Print instructions Print vertical without support

Shrimp BOV chin rest for rebreather

A chin rest for Shrimp BOV to make diving more comfortable

Gasmask Breather Dildo for Nato RD40mm

Plugs and Head Cover for the KISS Sidewinder Rebreather

Print them yourself or order from Shapeways. Ordering available for: - Scrubber Head Plug - Scrubber Bottom Plug - Head Cover - Head Protector The plugs will fit the loop / counterlung orifices on the scrubber bodies of the KISS…

Mask breather grid

Grade respira melhor para mascaras Grid breathe better for masks Print instructions Print vertical without support

Rebreather tank carrying handle and base

Equipment that you can use to carry or store 3 liter tanks, 100mm wide. Same size what JJ ships with. Two parts design. If you only use it for storage, print just the base. If you use it for carrying, print both parts. Attach the handle…

James Bond Breather from Thunderball - remix

This is a remix of the James Bond Breather from Thunderball (Sean Connery), found on thingiverse. While the original model uses printed air cans, I wanted to reuse 12g CO2 capsules. If you are looking for the 007 James Bond Breather from…

Revo Rebreather DSV Nerd2 Mount

Regulowany uchyt NERD 2 do Revo CCR.

Darth Malgus Rebreather

A file from my Pepakura making days that I discovered in Pepakura Designer you can export to .OBJ and in "Windows 10 3DBuilder or 123Design" export to .STL. Unfortunately I don't have the skills yet to improve further on the model, but…

KISS Sidewinder Rebreather Scrubber Caps

print two of each cap. One goes on the loop side of the scrubber, the other goes on the counter lung side of the scrubber. They are labeled for convenience. I designed O-Ring grooves to fit the KISS Sidewinder spare parts kit so you can…

Scepter Water Container Breather Valve Knob

This knob slides over the original breather valve knob to make it easier to grip.

Scrubber Fill Stand for the KISS Sidewinder Rebreather

Keep the scrubber canisters for your KISS Sidewinder standing upright reliably while filling them, even on an uneven surface. Needs base support for printing. Update (9 April 2024): After these stands break on me a number of times when…

Screw-on oil funnel with breather M35x4.0

Can be printed as-is without supports even on small printers. Tested for: Mazda Miata NA/NB If you print this thing, please upload a make and comment if it fits your vehicle.

Rogue 1 Imperial Hovertank/Assault Tank Pilot "Breathers only"

These very cool breathers fit perfectly well in addition to aTank Trooper Helmet. Sorry Helmet is not available here on Thingyverse All credit to Geoffro for creating the Tank trooper Helmet which can be found here.…

Cad Bane Back Breather Greeblies

Parts for my version Cad Bane's Back breather. mostly complete but still a work in progress

Jayco Breather Cap Replacement

Jayco Caravans & I'm sure many others have breather caps on the water tanks, this is a replacement as they can fall out.

Wasteland Breather Mask

Another post apocalyptic wasteland mask. Great for cosplay or Halloween.

Kiss Rebreather DSV Chin Rest

This is a chin rest for a KISS Spirit or Sidewinder DSV. It is for the current version with the drain port in the center of the DSV. I will not work with the drain on the side. This reduces jaw strain when diving in a strong current or…

wine bottle funnel with breather

Multi-purpose funnel with breather Bottom diameter: 14 mm Upper diameter: 115 mm Height: 147 mm

Sensor Calibration Kit for the KISS Sidewinder Rebreather

A kit to allow you to calibrate your oxygen sensors without having to assemble the entire unit. It was designed for the KISS Sidewinder, but should work just as well for other KISS models with the same type of scrubber, like the Orca…

Poseidon Rebreather Port Cover

A friend of mine is a dive instructor and owns a Poseidon SE7EN Rebreather. He needed a cap to protect a manifold (port cover) during transport and between dive trips. This is what I designed for him and the fit was great. You should use…

Covid 19 mask breather: Remix, full flat 3D print or laser cut

... my Bowden setup struggled with the snap on buttons on the original design. => I redesigned it fully flat with hooks. Two sizes: for standard 17cm masks as well as 14cm "kid size" masks. As always: use responsibly at your own risk!…

MGA/MGB Gearbox and Rear Axle Breather Vent

Originally this part was made of steel, then at some point they switched to a plastic unit of nearly the same dimensions. For some decades, if you try to order a replacement you will get a part used on the late MGB, which looks nothing…

Fathom Rebreather Scrubber Lock Ring Tool

This tool engages with the finger grooves on the lock ring at the top of the Fathom Rebreather scrubber to make it easier to tighten or loosen. For best results print with the hollow portion pointing up.

Cad Bane Back Breather complete

All parts to build Cad Bane's Back Breather BoBF minus the tubes connecting to the face (CPAP hoses were used on the show). Category: Props

Mask breather - scalable

Idea taken from here: https://www.thingiverse.com/thing:4602658 And here: https://www.thingiverse.com/thing:4616506 Thanks for your designs!! I use the second design all day long and wanted to scale it down to also print a smaller version…

Breather/Vent for Exterior Cabinets/Boxes/Storage (Waterproof)

I needed some ventilations to some exterior boxes, but didn't wanted it to allow entering water, so I designed these ventilations/breather pieces. Here you will find two different designs, one to be fitted at the top, another one to be…

Rebreather 'Inline' Tank Valve Protective Cap

This is a replacement protective cap to go onto the top of an 'inline' style SCUBA tank valve like the ones commonly used on rebreather dilunent / oxygen tanks. I am not sure what the brand of valve is that I made this for, I think it is…

Gas Can Breather Cap

I created this cap to replace the breather cap on my older 2.5 gallon gas can. I measured and estimated the threads and that seemed to work fine.

Dust Caps for the Dräger Dolphin Rebreather

Dust protection cap for the non-standard connections used on the Dräger Dolphin semi closed rebreather (and potentially other rebreathers made by Dräger). These allow you to cover the outlet on the tank and the inlet on the first stage…

Exhaust Bubble Disperser for the Dräger Dolphin Rebreather

This is an exhaust bubble disperser for the Dräger Dolphin Rebreather. It breaks up the bubbles coming from the unit when running into smaller bubbles that will disperse into the water, making it run quieter and without noticeable…

John Deere 824K High-Lift Wheel Loader crank case breather

(uploaded an updated version to strengthen some weak points) One of our loaders at work had worn out its factory breather hose adapter. We work in a remote part of Mongolia so parts are hard to get and take a long time to arrive. I had…

Coaxial Sensor Back Cover for the AP Diving Inspiration Vision Rebreather

Print it yourself or order from Shapeways ! When using a 4 or 5 cell holder like this one on an AP Diving Inspiration Vision rebreather, the coaxial cables to connect to the sensors used for external monitoring often come without a back…

Jaguar XJS/XJ12/V12 PCV Breather Hose (C44386)

PRINT IN TPU SO IT'S FLEXIBLE AND OIL/GAS RESISTANT This is a replacement elbow for the PCV/Breather on a Jaguar V12, P/N#C44386 I made the top of the elbow flat enough that it can be printed upside down, no supports necessary. Might have…

Snapmaker U1 breather

I printed the slim mix of the hamla adapter, but when printing PLA I don't want it to be fully enclosed as it might get the internal temp too high for PLA, so after having diferent pieces holding the hamla up, I decided to make it a…

Head Lock Ring Tool for the AP Diving Inspiration Vision Rebreather

Print it yourself or order from Shapeways ! This tool can be used to remove / tighten the big lock ring on an AP Diving Inspiration Vision rebreather. This kind of disassembly is required when replacing the standard 3 cell holder with a 4…

Death Trooper Rebreather Inserts

I was going to add some lights to this but then thought I've already have some day glow green filament I could use instead. Maybe I'll get around to the lights. I haven't glued them, they are just press fitted in for now. These are for…

Guzzi small bock engine breather box.

Body printed in ABS Seal ring printed in Recreus Filaflex original Requires short lengths of 10 and 15mm copper pipe for tube connections Road tested 5000 miles without issues. Might benefit from a one way valve like the big block guzzis.…

Parametric Hydraulic Fluid Tank Breather Cap

The plug/cap for my father-in-law's RV hydraulic fluid tank broke and getting a replacement was going to take weeks (it was also kinda expensive at like ~$50 shipped). I made this replacement for him and it has been working well in that…

Mercedes W115 Breather Tee

Mercedes-Benz P/N A1150160081 (115 016 00 81), rubber tee in the crankcase ventilation system for certain W115 cars with the M115 engine, possibly others. Dimensions taken from original part, which is apparently NLA or at least I was…

Oil drain pan breather- screw on

I hated the push on breather that my drain pan container comes with from the factory since it never pushed on and always leaked no matter what. I designed this to screw in and mostly stay in place, allowing you to screw off the drain and…

yamaha vmax 1200 breather bottle replacment(k&n stage 7)

when you put a stage 7 kit on the vmax, the original bottle design uses hoses that gets brittle over time. designed a new breather bottle that can be used in a bunch of different arrangements for hose configuration. you will have to come…

Scrubber Spacer for Kent Tooling Box for AP Diving Inspiration Rebreather

Spacer designed to go in between the box and the scrubber canister in a Kent Tooling box for an AP Diving Inspiration rebreather. The thickness is chosen so that, with the lid lock pin facing the box front, the exhale hose connector is at…

Cave Shield for the Kent Tooling Inspiration Rebreather Frame

I designed this to make it easier to get into these tight spaces with a Kent Tooling frame for the AP Diving Inspiration rebreather, by avoiding to hit the front / top face of the frame. I got it laser cut from a 1.5mm plate of 316…

Oil stopper with breather hole

The original part got lost. Used to plug the top of an oil reservoir on a 25kg Anyang Power Hammer. Its taped to have a friction fit and has a small breather hole so it isn't blown out from the back pressure. Printed in PETG, 2…

Toyota Chinook Camper Window Weep Breather Vent Cover

There are four vents on the bottom rail of each sliding window on a Toyota Chinook Camper. The original plastic vents were super fragile, so this is the replacement I made. I made a single model and a tray that can be printed to replace…

N7 Breather Helmet for debug

Issue happens at the support tower on toolhead 4

LS3 Breather pipes

On GMs LS3 there is a breather that goes behind the intake manifold to the valve cover. Should be printed out of flexible filament. I used TPU and it seems to be holding up to the temperature and blow by gasses just fine. I ran into heat…

Scrubber Plugs for the KISS Sidewinder Rebreather with Light Monkey Towers

The plugs will fit the loop orifices on the scrubber bodies of the KISS Sidewinder with the Light Monkey tower upgrades installed. The O-ring grooves are designed to take the same size O-rings as the towers, making it easy to get the…

Oil Funnel w/ Breather Tube - Fiat 124 Spider

Printed in Overture PLA Pro with 100% infill. I recommend a temperature resistant filament and letting the engine cool down before using.

Gearbox Breather 1/2" and 3/4" Thread

Modular High-Performance Gearbox Breather (PA6-CF) This is a high-durability, modular gearbox breather designed to replace standard disposable units. Originally engineered for industrial environments where thermal stability and chemical…

Funnel for 5kg sofnolime rebreather absorbent container

When a friend needed a funnel to fill a 5 kg sofnolime (absorbent for rebreather) container, I designed and printed this for him. This funnel has screw threads, based on DIN 6063. I am designating this thread "KS38", although that is not…

28mm nozzel funnel with breather

I designed this funnel to make it easy to put oil into my car engine. There wasnt enough room to tip a 5 litre container without getting it everywhere. This funnel has a 28mm O.D. at the bottom, making it ideal to get inot the hold it I…

Breather Pot

I designed these pots since I could not find what I wanted. They have a slight taper to the top. Have fun, I hope they work for you.

90 mm Fan Lifted Air breather

90 mm fan breather lift

NonRebreather Mask Replacement Washer (EDUCATION)

Replacement Flex Washer for NonRebreather masks in Simulation Labs. These washers go missing every so often in our labs after being utilized by hundreds of students. Printing Notes & Recommendations: Use Flex (such as Ninja Flex) or TPU…

12 Valve Cummins breather.

If you have a little extra blow by or a non breathable tappet cover this will help. I have not idea if it will fit other trucks. It fits my Cummins 12 valve. I printed it with PETG and the sealing ring in TPU. I bought course stainless…

Scrubber Plugs for the APD Inspiration Rebreather

The plugs will fit the loop orifices on the scrubber / head assembly of the APD Inspiration. The O-ring grooves are designed to take the same size O-rings as the unit, making it easy to get the right size ones from a spares kit. Use the…

NA Miata Breather Hose Clip

My miata had the full rubber hose instead of the chrome pipe with 2 rubber hoses, and the clips were broken. I remodeled what was there with a few print-ability changes. The vent hose on my car measured 16mm, so this is sized for that.…

BMW Breather Vent Hose 11151276485

While working on my 535is I needed the vent hose that connects from the valve cover to the intake boot. I had ordered the part but it hadn't arrived yet and I wanted to start the car to troubleshoot some other issues. I created this model…

Voltaic v1 Enclosure with added holes for breather and CAZN USB port

New Parts: https://atlavox.com/products/usb-c-waterproof-bulkhead-extension-ribbon-cable https://www.amazon.com/dp/B0BKY2LLLV?ref_=

Vance and Hines VO2 air intake breather plug

Small plugs to block the predrilled holes on the air filter bracket where crankcase breather hoses go. Useful when installing an external crank case breather/catch can. Printed out of TPU.

Air Breather Box

Threads will need to be tapped in order to receive the push to connect fitting in the bottom of the breather. Intended to be remote mounted for low air volume applications.

Bean Machine 12 valve Cummins self draining breather. Use at your own risk

Removing ths supports suck. Use a high temp strong filament. 2 short silicone hoses. need to use automoive sealer and screws to attach the cover or soldering gun. This fits my 12 valve cummins Bean Machine tappet cover that leaks oil. Use…

Wrench for 10 Point Oil Breather Cap Harley Davidson

try laser cutting me if you value your time! Category: Hand Tools

Breather tube holder for Ubbi diaper pail

The Ubbi diaper pail is decent (smell issues aside) but has a pretty big issue: a full bag of diapers creates a seal, making it much harder to take the full bag of diapers out of the pail. A solution: a breather tube that allows air to…

Screw-on oil funnel with breather M35x4.0

Can be printed as-is without supports even on small printers. Tested for: Mazda Miata NA/NB If you print this thing, please upload a make and comment if it fits your vehicle.

Voltaic v1 Enclosure with added holes for breather and CAZN USB port

New Parts: https://atlavox.com/products/usb-c-waterproof-bulkhead-extension-ribbon-cable https://www.amazon.com/dp/B0BKY2LLLV?ref_=

Gasmask Breather Dildo for Nato RD40mm

Better version of the Breather. Print in TPU or PP, for flexibility, PP can be put in dishwascher and is food safe.

Harley-Davidson breathers oil catch can

FOREWORD So, there should really be no need for this, but any time I speak with other Harley owners there happens to be someone falling from the tree and knowing nothing about this matter. To be compliant with anti-pollution regulation,…

Medieval Art - Street Performer - Fire Breather

Medieval Art - Street Performer - Fire Breather 3D printable model.

Decathlon diving to breathermask

The two parts to make from the Decathlon mask a breathing mask