Tesla Mobile Charger (NACS) Wall Plug
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple wall plug to keep your Tesla charger organized and on the wall.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 87
- Wydruki
- 0
- Wyświetlenia
- 757
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
I designed this model by myself entirely! It's my first time uploading something to printables. For my installation, I cut out a piece of 3/4in plywood and screwed that into the stud first, before screwing the printed part into the plywood. You can also just use drywall anchors if you'd like, as the charger isn't that heavy. Just make sure to file/sand the tip of the hook as it is a little sharp once you remove the support. PS that weird design on the front of the charger isn't in the final design, I forgot to flatten it before printing mine and didn't want to reprint the entire piece. Happy Printing!