Bosch Advanced Rotak 650 Height Button
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This button replaces the weak factory button for a Bosch Advanced Rotak 650 lawn mower
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 290
- Wydruki
- 4
- Wyświetlenia
- 876
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
My friend asked for my help with fixing his lawn mower. The button for locking the lawn mower height broke and he asked me if I know a way to glue it back whilst making it at least as strong as it was from the factory. The alternative he found was to lock the height using some screws.
I managed to design a new part and I think I make it significantly stronger than the original one. I printed it in ASA so it should last long enough outside. I have no experience with PETG.
The lawn mower is a Bosch Advanced Rotak 650. We tested the part and it worked just like the original one.
I designed it in a way you can reinforce it with some long 3m screws:
- 2x M3 x 50mm screws - this is the ideal length, but you may use some shorter ones
- 1x M3 x 28mm screw
The locking clips are connected to the outer wall so they are easier to print, but you can use a knife to disconnect them after printing. I would recommend using a 0.2mm layer height on a 0.4mm nozzle.
