Beefy Idlers for Troodon 2.0
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Beefy idlers for the Troodon 2.0
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 61
- Wydruki
- 1
- Wyświetlenia
- 672
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v2.0
The stock front idlers for the Troodon 2.0 are functional, but lacking in performance, usability, and appearance in my opinion. So, I decided to remix the famous Beefy Idlers for Voron 2.4 printers that was created by Clee. I used Tetsu's Symmetrical BFI remix of the original design as the basis for this remix.
Note: Due to the extra thickness I had to give the idler arms to accommodate the Z belt hooks, shorter hotends/lower toolheads might not be compatible with this mod since the Z carriages on the front are lowered. Before installing these, lower your nozzle down to the point where it touches the bed and measure the distance between the bottom of the z carriage and the bottom of the printer. If this distance is 15mm or greater, these idlers are compatible with your setup.
A better version of this idler remix would include a better Z mounting system so that the stock hooks can be bypassed. I'm just not good enough at CAD yet to do this myself.
Optional spacers included for the back Z carriages.
Specifications:
BOM:
8x M3x50 BHCS
4x M5X30 BHCS
2x M5x18 pin
2x M5x45 BHCS
4x F695 Flanged Bearings
4x M5 Shim Washers
2x M5x45 BHCS
Slicer Settings:
Same as Voron standard: 40% Infill, 4 perimeters, .2 layer height, ABS/ASA