Beefy Idlers for Troodon 2.0
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Beefy idlers for the Troodon 2.0
- Rating
- 5 / 5
- Likes
- 11
- Downloads
- 61
- Makes
- 1
- Views
- 672
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- GNU General Public License v2.0
The stock front idlers for the Troodon 2.0 are functional, but lacking in performance, usability, and appearance in my opinion. So, I decided to remix the famous Beefy Idlers for Voron 2.4 printers that was created by Clee. I used Tetsu's Symmetrical BFI remix of the original design as the basis for this remix.
Note: Due to the extra thickness I had to give the idler arms to accommodate the Z belt hooks, shorter hotends/lower toolheads might not be compatible with this mod since the Z carriages on the front are lowered. Before installing these, lower your nozzle down to the point where it touches the bed and measure the distance between the bottom of the z carriage and the bottom of the printer. If this distance is 15mm or greater, these idlers are compatible with your setup.
A better version of this idler remix would include a better Z mounting system so that the stock hooks can be bypassed. I'm just not good enough at CAD yet to do this myself.
Optional spacers included for the back Z carriages.
Specifications:
BOM:
8x M3x50 BHCS
4x M5X30 BHCS
2x M5x18 pin
2x M5x45 BHCS
4x F695 Flanged Bearings
4x M5 Shim Washers
2x M5x45 BHCS
Slicer Settings:
Same as Voron standard: 40% Infill, 4 perimeters, .2 layer height, ABS/ASA