Counting matching models…
Firt of all Check out the github repository https://github.com/Radiotbo3d/SBFI What is this? These are replacement front idlers for Vorons (and Voron-based machines). This design is available for Voron Trident and Voron 2.4. Improvements?…
Thank you to the Voron Design team for all the hard work and amazing printers. Feedback on this mod is appreciated! I think this is a “must have” mod for the V0. Model C is the current LazyCam, but models A and B are here as well. I can't…
NEW VERSION THE 2024 / 22 / 12 ! REMIX OF THE FRONT IDLER TENSIONER FOR VORON 2.4 This is my remix of the front idler tensioner mod from Ramalama2 https://github.com/Ramalama2/Voron-2-Mods/tree/main/Front_Idlers In my opinion, the body…
I was having a hell of a time tightening my z idlers on my Voron 2.4 and decided to go for Chaoticlab's tool free version but I didn't like how he used a square nut (not common or used anywhere else) or hex nut (also not used/common for a…
I modified the original version to provide some more support as i converted a CR10 V3 and wanted the extra support for the extended belt runs.
Couldn't find any 40t toothed idlers, and the other models I found didn't seem to have a good grip on the belt so I made these. The 4mm bore ones are made to fit 2x F624ZZ Flanged Ball Bearing. The 8mm bore ones are made to fit 2x F688ZZ…
X5SA Pro pulley supports for toothed idlers. Includes support at the top of each bolt so that the idlers can run freely. It is designed to work with idlers ~8.6mm across. Print 2 x 2.6mm spacers and 4 x 1.6mm spacers. Print a normal and…
Some parts can be printed for color customizations. Please print using standard Voron parts print settings
Overview These replacement x-end-idler and y-idler parts have an extra 1mm of spacing to allow for 10mm wide toothed idlers to replace the Prusa supplied 9mm wide smooth idlers. Specifically, this remix was made to allow the use of…
Building upon my Pin Mod for the XY Gantry I have added the Idlers to the line up of modded parts! PLEASE NOTE. this mod is only compatible with my XY Gantry Pin Mod! Found here…
New improved version of my runice idler gantry blocks! there are quite a lot of improvements and some drawbacks: Compatible with full Centauri / Carbon 1/2 lineup stiffer assembly one piece design less hardware F695 bearing stacks instead…
The standard Daylight mounts dont work with Clee's Beefy Z Idlers. (BZI) so I made up a quick replacement.
Hello XL makers! This is a Remix for the Prusa XL Y-Carriage for toothed Idler Pulleys with a width of 10mm. I have written a detailed article about this, which deals with Gates' manufacturer recommendations:…
This is a set of adapted V2 BeltClamps if you use the ChaoticLabs Carbon Fiber Bracket Kit together with TorxFighter Zero offset Clamped GE5C Mount for Voron 2.4 + Beefy Front Idler The V2 BeltClamp design is used where possible and the…
Same thing as original design but You can use 4x BHCS M5x16 instead of 4x SHCS M4x16. Also M5 T-nuts fit just fine into the wheels. All parts are adjusted to fit M5 main tensioning bolt.
My kit y-axis idler started making clicking noises, so I wanted to replace it with a (hopefully) higher-quality alternative. I could only find 9mm, 20T GT2 idlers with a larger OD (18mm, instead of 16mm) and 13mm length (instead of 12mm)…
The stock front idlers for the Troodon 2.0 are functional, but lacking in performance, usability, and appearance in my opinion. So, I decided to remix the famous Beefy Idlers for Voron 2.4 printers that was created by Clee. I used Tetsu's…
This is a simple jig used to cut the 5mm rod required for the pins mod found here: GitHub - clee/VoronBFI: Beefy Front Idlers (for Vorons) This jig will produce: -22mm (4 required)
Taking the LazyCAM to Pin Mod! This remix adds Pin Mod Idlers to your favourite LazyCAM idlers so you can now have the best of both worlds! simply swap out these idler top parts for the parts in my OEM pin mod idlers found here……
Prusa XL carriages that have the Gates 20t 6mm belt 3mm id for prusa for where the belt touches the toothed side of the belts. It should make the belts last a lot longer in theory. I would install this mod with this one as it does require…
This is my “version 3” of TypQxQ's double sided XY idlers mounts for the Hypercube Evolution 3D printer design that uses mostly square nuts. Big changes in V3: Functional: Trimmed the guide protrusions that stick into the 3030 slot on one…
What is this? This is a mod that allows you to use 20-tooth idlers instead of 16-tooth idlers (or flanged bearings) on your Duender. Maybe you have some leftover, maybe you just ordered the wrong ones like me :-D And it replaces the big…
Attention: This ist for the old O-Rings! I will make new Version for the new O-Rings soon. This is a remix from @racerethan ( Prusa XL Left and Right Carriage With Gates 20t Idlers 3mm von racerethan | Kostenloses STL-Modell herunterladen…
Remixed to use 5mm idlers instead of 3mm, the rod hole is still 10mm. Print instructions Category: 3D Printer Parts Summary Remixed to use 5mm idlers instead of 3mm, the rod hole is still 10mm.
replacement front cover for trident R2 front idlers to double as depressor for the cutter...im using a4t + crossbow + xol cnc carraige for reference..if you use anything else it might not fit , CAD is available to make changes as needed.
These are replacement front idlers carriers for BFI 2.4. Check both to see which has the better fit Two Files: BFI-carrier-big-x2: Increases all the head screw dimensions by .5mm bfi-carrier-head-height-.4mm-higher: Increases only the…
These toothed idlers actually did absolutely noting . The test benchy came out completely indistinguishable from the non-toothed idlers. The non-toothed flanged bearing is also much stronger, 100% metal, is able to take more torque, and…
A beefier version of idler holder for V400. See original model for more details
Beefy Z Idlers are actually fatty... These Z Idlers are lean.
These revised rear idlers that allow for the use of toothed idlers in lieu of the smooth 695 bearings from the BOM. NOTE THAT THE BOM TOOTHED IDLERS FROM THE XY JOINTS WILL NOT WORK. The thick flange does not allow room for a washer…
Voron V0.2r1 Idler Crowns! This simple mod incorporates a few small but mighty features. crown on the top part align the top hat extrusion and hold them in place when the cam lock is engaged alignment nub added to upper Y extrusion…
I bought the toothed idlers from Printed Solid for my 2nd MK3. I expected they might not fit given they were wider and, sure enough, they are just a bit too wide. So I modified the original Prusa part to accommodate. It's really the same…
As per request: Multicolor Rama Front Idlers for Voron 2.4
I wanted a bit more style to my front idlers for the OpenFront mod so I lightly modified them.
Are you building a Trigacy by putting the Legacy gantry on a Trident frame? Then you will need these modified front idlers. Print and assemble them the same way you would the Legacy front idlers.
November 9, 2018 Major upgrade to this project as I'm using this for the development of my custom Prusa i3 type 3D printer (like AM8) based on 2040 Aluminium extrusion profiles and a 200x300 heated bed. All parts are printed. Please use…
I got tired of having my idlers mounts always cracking after some use (and abuse). Even the beefer remixes failed with some time due to cracks developing between layers. As an engineer I am aware that the position that the mounts were…
Add A hexagonal Theme to your Switchwire! Simply mirror the files for the left idler, I have included the files for the right one.
The original toothed and F623 idlers attach to where the 2040 and 4040 extrusions cross each other on the Ender. Some printers do not have this type of attachment (such as my Biqu B1 SE). This is a modification of the lower idlers so that…
Third stage print and build for gantry printable parts split into base colour and accented colour.
I used this mod to convert bear idlers to Fs-F695 bearings that are used in Voron etc.. Smoother traveling, no rubbing
BOM (untested buy at your own risk ! (but it should work i'm the best cad'der in the world (false) )) : (2x) M3x12mm metal pins. that's it then figure out the bearing and shims yourself duh…
Modified the stock front idlers/tensioners to use 5x15mm pins instead of bolts. Pins are captured when in use with no additional parts, and can still be easily removed when there is no tension on the belts. Use a piece of belt to hold the…
This is a remix of the 16T Tensioner puck for vekoj's Revised X-Axis for Prusa I3. This remix allows the use of the slightly larger (10x15mm 3mm bore) 6mm Gates belt 16T idlers by LDO. They are more robust than the tiny little idlers the…
Warning! If you use these parts, you will need the rest of the mods that go with it, you will change the geometry of your printer motion system and you will need to make sure that the edges of the bed, the end stops, the belt tension, and…
The second Voron 2.4 printed part needed following the build guide
A simple yet effective spool holder which reuses BoxTurtle idlers. I'd been using https://www.printables.com/model/957440-tush-the-ultimate-spool-holder for the past 5 years but recently I encountered an issue with a cardboard spool…
Pin mod for voron0 fron idlers, hw needed: pin 3mm OD with length 25-28mm (i got mine locally but there are plenty on aliexpress for example)
This is a cover that slides over the front idlers of the Trident R2 so that the Jabberwocky toolhead's filament cutting arm has something to press against. The fit over the idlers is meant to be slightly snug so that it stays on by…
I was having issues with my toolhead board colliding with my Z chain when homing Y Axis on my Micron R1 180. Custom Homing Overrides helped but didn't completely solve the issue. I wanted to find a solution that didn't require me to…
Hello XL makers! This is a Remix for the Prusa XL Y-Carriage for toothed Idler Pulleys with a width of 10mm. I have written a detailed article about this, which deals with Gates' manufacturer recommendations:…
The second Voron 2.4 printed part needed following the build guide
Third stage print and build for gantry printable parts split into base colour and accented colour.
This is a simple jig used to cut the 5mm rod required for the pins mod found here: GitHub - clee/VoronBFI: Beefy Front Idlers (for Vorons) This jig will produce: -22mm (4 required)
This is the Y axis on a X max 3 with significant strength upgrades. Use the existing rods and pulleys off the originals. there is a lot of supports used. I have attached a .3mf file as an example. ( you can print this and be happy ) 4…
Introduction I noticed a deformation of the belts. It's moving forwards causing the belt to be a few millimetres out of alignment. Consequence: the Z height cannot be respected without a correction in klipper (with distance_rotation ). My…
Modified corner cable covers for Voron2.4 with BZI Z Idlers that provides clearance for BZI Idler and Tensioning screws as well as provides an optional down hole to run wires along the extrusion.
Remixed idlers taken from Fysfys's original design. This version allows the idler mounts to sit on both sides of the extrusion. I remixed as I found the original was starting to bend inwards making the belts rub, this avoids the issue by…
Angepasst auf diese Original GT2 Riemenscheibe da sie etwas größer im umfang sind. Bei den Stock Idler (Silbernen ) aus den Kits passen keine 5mm DIN Zylinderstifte nur M5 Gewinde neben bei wurden sie auch noch auf die Richtigen seit…
Slight mod to fit my screws
I've had the tensioner break apart twice, so I simply made them longer (and made the assembly deeper). Visually, it's identical to the stock.
I used V2_DoubleT XYZ idlers and belted-Z mod and was quite happy with them. When the R2 came out, the gantry was improved, so I created this mod so I could continue using them. Unfortunately, my printer is currently broken so I haven't…
Front Idlers for a Voron Legacy that uses blind joints instead of the corner cubes. No dimensions have changed for position or linear rod length. Original files found here: https://github.com/VoronDesign/Voron-Legacy
This mod uses a 60mm bolt instead of 25mm. allows pulleys to be serviced without removing part from printer.
A beefier version of idler holder for V400. What's better? Adds space between the idler pulley so there's a room for self-alignment, so the sides of the belts are not being rubbed on by side rim of the pulley Allows to use a sexton screws…
You need these if you have a blind joint frame. The original idlers are designed to replace the 3 way joint, But if using a blind-jointed frame, those wont fit, and you need these instead. Like my work? Support me on Ko-fi!
The original uses two F695 ball bearings for the idler and M5 washers. The BOM did not account for these parts in the original manual as this is an optional yet required part for an 1140mm belt. This reuses the bearings on the Y-axis of…
Will require you to drill out the holes in the frame with a 5mm bit
Apart from making the middle part thicker I took used the pinmod and m4 mod from these people. Putting in in one download. 5mm carbon rod 2.5cm long can be inserted and the tension pulls it behind the ridges making sure they won't come…
I switched to BFI and BZI from Clee on my Voron V2.4 and like them a lot. I only had one issue, everything related to adjusting the Z Idlers. Getting to and adjusting the the downward facing BHCS were a hassle, especially the screw…
Rook 2020 MK2 Front Idlers with flush first layer for use with Kanrog's tutorial or a Bambu with AMS.
When first assembled the CNC Carbon fiber XY joints from Fysetc ( https://s.click.aliexpress.com/e/_DksC2Mh ), I didn't like the fact that they removed toothed idlers that are recommended in the BOM and used flanges bearings instead. So I…
This mod has much slimmer universal body and uses countersunk M5 screws instead of SHSCs. Main body is multi object for multi color print. Delete eyebrows if you print with single material. What you will need per idler: 2x M5 40mm 2x M5…
Single piece xy joint for voron 0 providing extra rigidity and precision, this one allows installing toothed idlers. Disable thick bridges if you can to make holes rounder. Due to the reduced bridging capability with it disabled, an extra…
Taking the LazyCAM to Pin Mod! This remix adds My Custom Pin Mod Idlers to your favourite LazyCAM idlers so you can now have the best of both worlds! simply swap out these idler top parts for the parts in my Custom pin mod idlers found…
